7/24/2013

Analysis of Philippines Feed Industry

More feed mills are needed in the two Philippine island groups of Visayas and Mindanao in order to reduce the cost of meat in these regions, according to the Bureau of Animal Industry (BAI)

There are very few feed mills in the Visayas and Mindanao, and this is the reason meat prices there are high, according to Dr Angel Mateo, officer in charge of the Animal Feeds Standards Division (AFSD) of the BAI,

There are 1,730 feed manufacturers in the Philippines, all located in Central Luzon and the NCR, which means feed prices in Visayas and Mindanao are higher due to transport costs.

“There is a need for more feed mills in Region 8 [Eastern Visayas] and the ARMM [Autonomous Region in Muslim Mindanao],” said Mateo. “ARMM needs more investments for the production of halal feed or those with no pork component like lard.”

Mateo noted that investments in the feed industry are hindered by the lack of land since large areas have been converted for other purposes and not agricultural production.

Feed Pellet Mills






7/04/2013

Why Spray Fat after Pelleting?

Firstly, I will introduce one type of fat spraying machine-pellet coating machine. The pellets coating machine adopts excellent post-addition technology, which can spray nutriment and medicine on the formed pellets' surface. You can add oil and fat, zymin, vitamin, organic acid and microorganism etc. It is an important machine for feed pellet processing. The nutrition adding machine can improve the quality and processing characters of the feed pellets.

Feed Pellet Coating Machine
Why Spray Fat after Pelleting?
1. Spraying fat after pelleting can improve the additive quantity. Improving the fat ratio according to the formula won’t influence the firmness of the feed pellets.
2. The fat spraying adopts post-addition technology, that can decrease the fat residua on the processing equipment, thus the risk of cross contamination reduces too.
3. Post-pelleting fat spraying can upgrade the feed quality. The physical property of the feed is improved. The fat has certain permeability, it can permeate into the pellets in subsequent crafts and transport process. That can reduce the scatter of feed particles and dust.

6/28/2013

Analysis of Feed Production Market in Russia

In May of this year Russia produced 1,813 thousand tonnes of animal feed, an 8%
rise on May 2012, according to a report by the Russian Federal Static Service. Poultry feed production rose by 7% to 1,075 thousand tonnes, pigs by 18% to 569 thousand tonnes, while cattle feed production was 160 thousand tonnes, an 11% drop on May 2012.

Cow Feed Pellets
For 11 months of the current season Russia produced 19.3 million tonnes of animal feed, which is 11% more than the same period last season. The volume of production of pig feed increased by 23% to 6.1 million tonnes. Experts predict that by the end of the current agricultural season Russia will produce more than 20 million tonnes of feed a first time record.


Due to the great demand of feed pellet, it is a good opportunity to invest animal feed production. Dedicated to providing animal feed pelletizing solutions for 12 years, Amisy Pellet Mill Machinery is ready to make perfect project for any scale feed pellet plant. The feed pellet production line can be used to make various poultry feed and aquatic feed for rabbits, ducks, cattle, chickens, sheep, pigs, pigeons, fishes and shrimp etc. The whole production line can be control by the automatic PLC control system.

6/04/2013

Feed Pellet Grading Sieve

The common feed pellet grading sieves have two types: vibrating feed pellet grading sieve and rotary feed pellet grading sieve. Grading sieve is a necessary equipment for feed pelletizing plants. I will introduce rotary feed pellet grading sieve as the following.

Rotary feed pellet grading sieve is designed to sieve and grade feed pellets or the intermediate products after secondary crushing. It can also be used to clean the raw materials for pelletizing. The grading sieve usually has two or three sieving layers, with good sieving and grading effect. Customers can choose the suitable one according to their need.

Rotary Feed Pellet Grading Sieve
How does the Feed Pellet Rotary Grading Sieve Work? 
The screening effect is important for the quality and output of feed pellets. In order to improve the yield and reduce the power consumption during pelletizing process, some pelletizing plants use the feed pellet mills with large die diameter. Then they crush the large pellets into smaller ones. The crushed pellets should be graded to separate out the fine powder and large pellets, and get the qualified pellets at last. The rotary grading sieve is equipped with two sieve layers. The large pellets on the upper screen will be crushed again; the qualified pellets are in the inter-layer; and the powered or small particle materials under the lower screen will be pelletized again.

6/02/2013

Feed Pellets for Ducks

Duck gets more popularity around people due to the features of easy digestion, rich vitamin B, E and niacin content.

Now breeders are more inclined to using feed pellets to raise ducks. Duck feed pellets should consider the ducks' living condition, feed ingredients, nutrition value, production property etc.
Feed Pellets for Ducks
Breeders should fully utilize the local feed ingredients which have nutritional value and low price so as to reduce production cost. The varieties of feed pellets should be as much as possible in order to make nutrition comprehensive. Some people think the more nutritional the feed pellets the better the ducks. Actually it is wrong because all poultry's feed intakes rely on feeds’ energy level. Ducks intake less feed pellets which have high energy level; and when feed have low energy level the feed intakes will increase. Therefore the feed pellets’ protein and energy proportions should be balanced otherwise it causes innutrition or overnutrition and feed pellet waste.

5/25/2013

General Introduction to Counterflow Pellet Cooler

The counterflow pellet cooler is applied for efficient cooling of hot and moist pelleted products with good flowing capabilities. Typical applications are for cooling of feed pellets and wood pellets. It can reduce the temperature of pellets from 80~90℃to about 3~5℃ above ambient temperature. And the pellet moisture content is reduced from 17%~18% to 12%~13%. The advantages in energy efficiency, easy operation, great cooling result and lower investment cost have made the counterflow pellets cooler the preferred choice for most users of feed and wood pellets plant.

countercurrent/counterflow pellet cooler
How to Choose a Pellet Cooler for Your Pellet Plant?
The counterflow pellet cooler material discharging device adopts slide valve reciprocating type, it is suitable for pellet materials. Some coolers are with shutter type discharge mechanisms, which are adopting hydraulically powered discharging mechanism. These coolers are suitable for puffed and expanded materials.

What Should be Noticed When Operate the Counterflow Pellet Cooler?
1. Start the air-lock device and draught fan before the cooler starting to work.
2. Adjust the level indicator position according to the yield requirement. When the yield is high, install the level indicator at top position; on the contrary, install it below.
3. When the cooler stops working, expel the material in the cooler through operating the hand switch.
4. Don’t open the observation door when the cooler runs.

5/23/2013

Factors Affecting The Feed Pellet Hardness

The hardness of feed pellets directly affects their appearance and production property. So controlling feed pellet hardness is a problem the feed manufactures have to face. The factors affecting the hardness mainly include the feed ingredients grinding process, feed ingredients mixing, water adding and steam modulating process and post curing technology etc.

Feed Pellets Made by Feed Pellet Mill

  • The pulverization fineness of feed ingredients plays the decisive role in feed pellets hardness. Generally speaking the finer the particle size the better the starch gelatinization.
  • Mixing raw materials can increase the uniformity of feed compositions with all kinds of granularity and ensure the feed pellets have basically identical hardness. 
  • Steam modulating effect directly affects the inner structure of feed pellets. Steam quality and modulating time are two main factors affecting the modulating effect. 
  • Post curing process can make the inner structure more compact and increase the stability and hardness of pelletized feeds. 
  • The technical parameters of pelletizing die such as the aperture and compression ratio significantly affect the hardness of feed pellets.



Why Choose Feed Ribbon Blender When Process Feed Pellets?

Feed ribbon blender is an efficient and versatile blending machine for mixing of dry granules & powders homogeneously. One of the main application of ribbon blender is mixing grain powder with other nutrition in the feed pellet plant. During the blending process, you can add other liquids to the grain powder, making the feed pellets more nutritional. The feed ribbon blender is well suited for preprocessing of feed mixture for making aquaculture, poultry and fish feed pellets.

Feed Ribbon Blender
Why Choose Ribbon Blender In Feed Pellet Plants
1. Ribbon feed blender has outstanding mixing effects for powder & liquid, granule products and fibers, especially for mixing grain powder.
2. This mixing machine will not produce over-heating and pressure-fed results when processing allergic material. The nutrition of grain powder will not be damaged during mixing.
3. As for materials with different proportion and granule size, this feed mixing machine will not lead laying results which totally meet the requirement of feed material mixing of different raw materials.
4. You can add liquid conveniently while mixing.
5. Convective circulation ensures an efficient and homogeneous mixing effect. 

The five aspects mentioned above totally confirm to the feed pellets material mixing standards. So ribbon blender is indispensable mixing machine for feed pellets production, especially for fish, shrimp and other aquatic feed pellets.

5/21/2013

How to Control The Feed Pellet Quality During Pelletization

The production property of animal is closely related to the feed pellet quality. Most breeders concern how to correctly use the feed pellet mill to produce the high quality feed pellets. The equipment inspection and maintenance and modulating technology are two main factors.


  •  Inspect the wear pattern of ring die and compression roller. The wear of compression roller will affect the production capacity; the undue wear of ring die will decrease its effective thickness and influence the feed pellet quality. 
  • Regularly check the crusher roller. The excessive wear of corrugated toothed ring decreases the crushing ability. 
  • Examine the cutter of feed pellet mill. The cutter wear will increase the feed powder.
  • Inspect the steam separator to ensure the steam quality. 
  • Inspect whether there is material backlog and screen surface damage in pellet cooler. 
  • Examine the grading screen surface. The clogging and sticking of screen surface will affect the grading effect of feed pellets. 

5/20/2013

General Introduction to Diesel Flat Die Feed Pellet Mill

Diesel Feed Flat Die Pellet Mill
Diesel feed flat die pellet mill is designed for small-scale production, particularly for homeowners and small-scale producers to make pellets for animal feed pellets. The diesel flat die pellet mill can run smoothly and with few noises, especially popular in the electricity lacking areas.

Features of Diesel Flat Die Feed Pellet Mill
  • Visible chamber design makes the pelleting process clear and visible, so it is convenient to solve problems in time.
  • Adopt screw-center adjusting pressure structure which makes flat die pellet mill more practical.
  • Driven by a diesel engine makes feed pellets production available in the rural area with shortage supply of electricity.
  • Equipped with the clutch and accelerating-decelerating device to change its speed.




5/15/2013

Advantages of Extrusion Over Pelleting

  • Buoyancy can be controlled, thus floating and slow sinking feeds can be produced.
  • For many species extrusion increases carbohydrate availability.
  • Extruded feeds are usually capable of carrying higher fat levels than pelleted feed.
  • Extruded pellets generally have greater physical integrity and produce less fines.
  • Under some circumstances greater water stability can be achieved with extruded feeds.
  • Extrusion can aid in the destruction of microorganisms and some other contaminants. 
  • Wet materials such as fresh minced fish can be readily incorporated into extruded products. 


Extruders — Dry Cooking or Wet Cooking

  • Dry Cooking Extruders
Dry cooking extruders are designed to run without adding any moisture to the ingredients. They are used in processing low moisture, highly expanded feed.

In dry extrusion there is no preconditioning of the ingredients with steam or moisture before entering the extruder barrel. All the heat produced by the dry extrusion process is generated by the mechanical energy applied to the ingredients via the screws, steamlocks and the barrel wall.

These simple dry extruders have since been transformed into more complex pieces of equipment with increasing product flexibility. Longer barrels can now provide increased capacity and cook. Increased selections of screws, steam locks and barrel liners allow high, medium or low shear configurations. Precision metering pumps for water and steam injection to the extruder barrel or to the conditioner provide additional capabilities, such as increased product cook and better shaped extruded products.

Aquafeed Extruder
  • Wet Cooking Extruders
Wet cooking extruders are more complex equipment with precision metering systems for steam or water injection into either the conditioner and/or the extruder barrel. Preconditioning is a very important part of the extrusion process. The single most important aspect of the preconditioning system is the potential for additional mixing and the retention time, which is necessary for chemical or physical reactions to take place.

Conditioner types are also varied with a single or double mixing shaft, and may include differential diameter or differential speed conditioning cylinder systems. Preconditioning of ingredients prior to entry into the extruder barrel increases the degree of cook and reduces the wear on internal extruder parts. To increase control of the cooking process, the extruder barrel of a wet extruder is also jacketed for steam or water injection for additional heating or cooling.

Like the dry extruder, the wet extruder has single and/or double flightscrews, 
shearlocks, and heads. However, the wet extrusion system has a greater variety of single and double flight screws. It also has a more complex array of single or double, cut-flight screws and cone head screws, shearlocks and heads for more intricate extruder configurations.

Resource: http://www.aquafeed.com

5/13/2013

Horse Farming and Feed Pellets

The modern horse industry has received good development in developed countries which becomes the main economic growth point and provides a large number of employment opportunities.

The modern horse owners not only require horses are healthy but also hope they are satisfactory in all respects. This drives horse owners to buy top quality horse feeds which have balanced nutrition and make horse receive sensual satisfaction. Horse feeds’ appearance, texture, flavor and palatability are the main considerations when feeding horses. Doubtlessly feed pellets are the optimal feeds for horses.

Feeding horses with feed pellets is considered from horses’ digestive physiological characteristics. Horses have hard teethes and developed masticatory muscle. So feeds with hard texture and soft surface conform to horses. Horse has fast metabolism and strong servitude thus feeds’ residence time in the stomach is short. Feeds with small size and balanced nutrition are good. Horse’s intestinal tract is uneven in thickness therefore they have bad ability in digesting low-quality coarse feeds. Feed pellets are produced based on the nutrition needs of horse, adopt scientific formula and mix a variety of raw materials evenly according to a certain proportion, then with a series of processing to form the final pellets. So pellet feed owns balanced nutrition content and good palatability for horse farming.



5/10/2013

Introduction to Electric Flat Die Feed Pellet Mill

Electric Feed Flat Die Pellet Mill is an ideal pelletizing machine mainly used for small-scale production of animal and poultry feed pellets, grain feed factory, farm, poultry farm . The raw materials are easy to obtain, like corn, maize, wheat bran, rice, beans, etc. Driven by electric motor makes it more energy-saving and environmental friendly.

Electric Flat Die Feed Pellet Mill

Electric Flat Die Feed Pellet Mill Features

  • Driven by electric motor makes it more energy-saving and environmentally friendly.
  • Made of wear-resistant material, ensure a long service life
  • Pelleting process is visible, so it is convenient to solve problems in time.
  • Simple structure, small area coverage, easy operation and maintenance. 
  • Low consumption, competitive price and cost saving.
  • Wide usages for feeding animals like fish, shrimps, chicken, rabbit, pig, etc.

5/09/2013

Tips for Sheep Farming

1. The sheep density should not be too spare or too dense.
2. The feeding quantity should be controlled.
3. The water for sheep must be clear and sufficient.
4. The temperature and moisture of sheep pen should be appropriate.
5. The sheep pen should have good environment.

Feed Pellets for Sheep Farming

5/03/2013

Five Tips For Pellet Mill Die Maintenance

Die is one of the most quick-wear parts of pellet mills. In order to avoid wasteful spending, it is necessary to know more about pellet mill die maintenance.


By following simple rules as following, your die life will be prolonged and you will realize the greatest production from your dies.


  • The die must be secured held by the die clamp at all times.
  • Never abuse a die by striking it with a hammer or by dropping it on a hard surface.
  • Magnets, scalpers, and other cleaning devices are vital to the life of a die. 
  • The die clamp insert should be replaced if it becomes worn.
  • The care of the die is similar to that of a rifle bore. 



4/27/2013

Treat H7N9 and Chicken Farming Rationally

Over the past two weeks there have been a number of people infected with the lesser-known H7N9 virus in China. H7N9 is a serotype of the species influenza virus A (avian influenza virus or bird flu virus). H7 normally circulates among avian populations with some variants known to occasionally infect humans. Now patients infected with H7N9 are increasing. The exact infection source has not been detected but H7N9 has caused great damage to poultry industry especially chicken farming.

H7N9 Affects Chicken Farming
The H7N9 flu is detected in some poultry samples but the varieties of birds are wide and poultry is just a few varieties of the birds so it is not scientific to simply think the source of H7N9 flu is poultry. The direct influence is that people don’t eat chicken and kill chickens. This is unfair for farmers especially the poultry practitioners and causes unnecessary damage to chicken industry ant the whole industry chain.


Now for the chicken farming the breeders should take measures to prevent H7N9 flu. Improving chicken’s immune system is an important preventive measure. Feed is the material foundation and the main source of energy and nutrition for chicken growth and reproduction. Only the good feeds can increase the chicken’s immune system to prevent diseases. Feed pellets is ideal for raising chicken. It is produced by adopting scientific formula, mixing a variety of raw materials evenly according to a certain proportion and a series of processing. It has balanced nutrition for chicken farming. And during the pelletizing process liquid nutrition can be added to improve disease resistance. The good environment can reduce the chances that chicken are infected with H7N9 flu. The chicken feed pellets which have cylinder shape and do not produce dust are good to the living environment.

4/13/2013

What should be Noticed When Choose Aquafeed Raw Materials?


1.You can consider amino acid as one of the raw materials first.
2. Combining with local resource, confirm the raw materials varieties within 10.
3. When select protein material, you can take lysine and methionine unit prices as purchasing standard, but not the unit price of protein.
4. Don't use soybean meal or sesame meal with burnt appearance and smell, for lots of lysine is destroyed.
5. Fish meal is the main raw material of animal protein. You must analyze its amino acid before using.
6. Avoid using meat meal in hot seasons. The fat is easy to be oxidized and cause liver disease.
7. Silkworm chrysalises are easy to be oxidized for its high oil content. Test their freshness before purchase.
8. Blood meal is suitable for extrusion and spray drying technology for its low digestibility.
9. Wheat is better than wheat middling, for it can avoid adulteration and ensure the freshness.
aquafeed and aquafeed raw materials
10. Use zeolite powder, not stone powder.
11. Choose bean oil, rapeseed oil, edible lard or chicken oil for freshwater fish feed formula. Don't choose fish oil.
12. Feather meal processed by good hydrolysis process can be added into the formula, but not exceed 3%.
13. If choose outsourcing premix, check carefully.
14. Amino acid composition coconut cake and grape cake is not so good, you'd better not use.
15. Using microcapsule amino acid is a trend in aquafeed processing. It's the key of the production effect that whether the amino acid can tolerate high temperature tempering.
16. Don't purchase or add table salt.
17. The blood-cell protein must be all-broken, or it has no value.
18. Notice the aflatoxin and other hygiene indexes when purchase peanut meal.

4/02/2013

Raw Materials for Aquafeeds


Common basic raw materials to the manufacture of most aquafeeds are similar to those employed in the manufacture of other types of animal feeds. However, it should be noticed that aquafeeds should avoid the use of high levels of plant or vegetable fibers and carbohydrates which are poorly digested and transformed by fishes. Raw materials for aquafeeds include cereals (maize, wheat, barley, rice, oat etc.), cereal by-products (wheat flour, corn bran, wheat bran etc.), meat meal, fish meal, shrimp meal, squid meal, blood meal, poultry by-product meal, (full fat) soybean meal, other vegetable protein meals, fats and oils, vitamin and mineral premix, salt, stabilizers and binders etc.

extruded aquafeed and raw materials

The major components of aquafeeds are protein (plant protein, animal protein and single cell protein), starch (sinking aquafeed consists more than 10% and floating aquafeed consists more than 20%), crude fat, raw fiber, crude ash and micronutrients.

3/28/2013

Feed Pellets for Pig Breeding

Pellet feed first appeared in Europe, and in recent years, it has occupied the majority of the feed markets in America, Japan and Germany etc. The average level of our world in feed pellets using is about 60%. Nowadays, pellet feed has been widely used for raising of piglets, weaned pigs, pigs, chickens, cattle, sheep, fish and other livestock. 

Superiorities of Feed Pellets


  •  Convenient for animal digestion and absorption, improve the utilization efficiency of feed.
  • Improve nutrition value and palatability of the feed.
  • Convenient for storage, packaging and transportation.
  • Disinfection and sterilization.
  • Avoiding livestock and poultry picky about food, and reducing feed waste.



Sinking Fish Feed Extrusion Technology


Different aquatic animals have different feeding characteristics. Take river crab and other benthonic animals for example, they are used to seek food underwater; and they often chew with slower speed. Too hard or too firm feed pellets are not suitable for them. It also should to reduce the small fragments waste during their feeding process. So, the sinking extruded feed are beneficial for them. The sinking extruded feed has many advantages: easy to soften after absorbing water, suitable for chewing, decreasing the small fragments waste, decreasing the water pollution, long water resistant time and high aging degrees.

Twin screw wet extruders are widely used in extruded feed processing. The material extrusion situation is affected by many factors. It mainly connects with the conditioning conditions, operation of the extruder and the material character. The extrusion feed buoyancy can be controlled by changing the extrusion conditions.

1.The conditioning effect is important in processing sinking extruded feed. During the process, it needs to decrease the extrusion effect and increase the conditioning effect. Moisture adding,  steam adding and enough conditioning time can make the raw materials soften and cure fully. Thus the materials can achieve better plasticity under weaker conditions in the extrusion chamber. The materials can cure continually and won’t generate bigger puffing degree. We can get the sinking extruded feed at last. Fully conditioning can improve the feed digestibility, water resistance ability and stability.

2.Processing sinking extruded feed pellets should adopts lower screw rotation speed. It can provides the effect of shear and squeeze and won’t generate over-high pressure. At last, the materials through the die holes won’t be over-extruded.

3.Chamber temperature is another important factor for material energy control. In the chamber feeding section, it’s no need to heat to ensure good delivery performance. In fusion section, you must heat to ensure the chamber temperature reach 120~150℃. It can promote the material’s curing degree and plasticity. In the end homogenize section, the chamber temperature is cooled to 40~50℃. It can decrease the cured material’s energy and the supersaturation of the moisture in materials, thus the materials can be extruded out the die holes and not over-extruded.

4.Sinking feed extrusion degree is lower than 1.3 and floating feed can achieve higher than 2-3. The pressure inside the chamber are connected with the screw configuration, material character, porosity of the die and feeding quantity. The die porosity affects the pressure of the materials inside the chamber. If the die has higher porosity, the discharging flow is bigger. We can change the quantity of die holes according to our requirements to get suitable sinking extruded feed.

Traditional hard pelleted feed has low curing degree and sinking extruded fish feed doesn’t have the problem. Extruded feed has high stability in water and no need to add binder. Extruded feeds are widely used in aquaculture instead of hard feed pellets.

3/25/2013

Aquatic Feed Pellet Mill


With the development of aquaculture industry, the requirement of aquatic feed is increasing. Aquatic feed ring die pellet mill is an ideal pelletizing machine for large-scale high quality aquatic feed pellets. The finished feed pellets have a smooth surface and easy to digest for fish and shrimps. Based on advanced technology and outstanding advantages, aquatic feed pellet mill is widely adopted in aquaculture.


The SZLH series ring die aquatic feed pellet mill adopts three-layer jacket conditioner, the raw materials can be fully cooked to meet special needs and ensure the quality of final aquatic feed. Its capacity can be improved about 20% compared to the belt transmission for the use of high precision gear transmission. The feeding device adopts frequency conversion speed regulating motor to guarantee the particles quality. The pellet mill is equipped with overload protection and electrical control system to ensure normal operation. Then how does the aquatic feed pellet mill work?

Aquatic Feed Pelletizing Process
Pellet mill is the core part of a whole feed pellet production line. Meanwhile, there are also other important equipment need to adopt, like hammer mill, mixer, pellet cooling and packing machine. The main process includes: materials crushing, grain powder mixing, pelletizing, cooling and screening, packaging. The whole process is highly automatically controlled.

3/22/2013

Ultra Fine Feed Hammer Mill


SWFL series ultra fine feed hammer mill is a new-fashioned superfine grinding equipment. The ultra fine feed hammer mills can be used in various large, medium or small sized feed processing factories. It can grind all coarse materials such as corn, broomcorn, wheat and rice etc. The products can be further processed as animal feed, especially suitable for shrimp, turtle, eel and other little animals.
Remarkable Features of Ultra Fine Feed Hammer Mill
  • Widely used in feed, food, chemical industry, building materials, pharmaceutical and other industries, especially for finely grinding of grain powders for making aquatic feed pellets.
  • Built-in high precision micro wind grading, grinding fineness of 80-200 mesh, and can be arbitrary regulated.
  • Low power consumption, high capacity, stable performance and uniform size of finished products. 
  • Two types: split type and integral type can be selected to meet different customers requirements.
More information about feed pellet processing machines-http://www.feed-pellet-mill.com

3/14/2013

Fish Feed Pellet Machine / Fish Feed Pellet Mill / Fish Feed Extruder


Fish Feed Pellet Machine Introduction
Amisy fish feed pellet machines have two types: dry type fish feed pellet machine and wet type fish feed pellet machine. According to your requirement, you can choose to produce floating fish feed pellets or sinking feed pellets. Amisy feed pellet extruder can produce animal feed pellets with diameter from 1-15mm, applicable to produce pet food, fish feed pellets, shrimp feed and other animal feed pellets.

fish feed pellet machine   fish feed pellet mill

Dry Type or Wet Type, Which Fish Feed Pellet Machine is Suitable For You?
The highlight difference between the two type puffing feed pellet machines are whether equipped with conditioner which is used to connect steam boiler, that is also to say, wet type need to install a steam boiler, while the dry type one doesn't need it. The other difference is the capacity, take DSP60 for example, the capacity of dry type fish feed pellet machine is 0.12-0.15t/h, while the wet one is of 0.18-0.20 t/h. So considering the two factors, you'd better choose the most cost-effective machine. If you have any other question, please chat on-line, leave us a message or send email.

More details:http://www.feed-pellet-mill.com/product/Feed-Pellet-Mill/fish-feed-pellet-machine.html

3/12/2013

How to Get the Ideal Feed Pellet Mill Manufacturers


Feed pellet mills are widely used in the breeding industries. They can be widely used in large-size, mid-size or small-size feed processing factories, livestock farms, poultry farms and individual farms etc. Using feed pellet mills to make feed pellets for livestock, poultry, and aquatic creatures has practical value for they can improve the absorption of feed. Now more and more people intend to buy feed pellet mills. However, finding a feed pellet mill of high quality is not as easy as you might think.
There are many companies out there manufacturing feed pellet machines. You need a company that will not only supply you with a durable pellet mill but also a pellet mill that can be serviced, a pellet mill that you can get spare parts, as well as a pellet mill that will perform according to your expectations. But finding such a company can be an intractable due to the wide spectrum of pellet mill supplies. However it comes as a welcome surprise that people, especially consumers have listed some of the good feed pellet mill manufacturers and Chinese feed pellet mill supplies come highly recommended in this list. Feed pellet mills from China have the uncanny ability to deliver constant output for long periods of time. These feed pellet mills are the preferred choice of many industrial organizations specializing in pellet production.
Another feature that draws people to feed pellet mills from China is the fact that they are easy to maintain. These pellet mills tend not to have many moving parts which reduce the chances of something going wrong and also it reduces the costs of repairs.
From the information above, we can choose the ideal feed pellet mill manufacturers from China trustingly. As the professional supplier of pellet mills, Amisy Machinery always offers you the latest news, the first-class equipment and after-sale service.